mketfs

Build an embedded transaction filesystem (QNX)

Syntax:

mketfs  [-l inputline] [-nv] [buildfile [outputfile]]

Runs on:

Neutrino

Options:

-l inputline
("el") Process inputline before interpretation of the buildfile begins. Input lines given to mketfs should be quoted to prevent interpretation by the shell (as mketfs input lines often contain spaces). Multiple -l options are processed in the order specified. No default.
-n
Don't use timestamps in the files. Using the -n option permits identical images in binary format. Specifying additional -n options strips all time information from files.
-v[v..]
Operate verbosely. Specifying additional -v options increases verbosity. Default is quiet operation.

Description:

The mketfs utility reads a text buildfile describing an embedded transaction filesystem (ETFS) and produces a binary image file containing the ETFS as a sequence of transactions. You can copy this file to flash at a later stage, using etfsctl.


Note: Don't confuse this command with mkifs, which builds an OS image filesystem, or mkefs, which builds an embedded filesystem.

The input and output files are specified on the command line:

buildfile
The filename of the buildfile that describes the contents of the embedded filesystem; use "-" to specify standard input (the default).
outputfile
The filename of the image file containing the ETFS; use "-" to specify standard output (the default). Note that you can specify the outputfile only if you specified a buildfile.

Buildfiles

The buildfile uses the same grammar as the mkifs command, but supports different attributes.

The buildfile is basically just a list of files that you want to be included in the ETFS image file when it's built by mketfs. As well as the files to be included, you can specify various attributes that are used to set parameters of the filesystem and the files in it. For example, you can specify the maximum size of the filesystem, or the user and group IDs of the individual files.


Note: You can't use a backslash (\) to break long lines into smaller pieces.

In a buildfile, a pound sign (#) indicates a comment; anything between it and the end of the line is ignored. There must be a space between a buildfile command and the pound sign.

Each line is in the form:

[attributes] file_specification

where the attributes (with the enclosing square brackets) and the file specification are both optional.

Attributes provide information about the file following the attribute. They're enclosed in square brackets; when combining attributes (e.g. to specify both the user ID and the group ID), enclose both attribute tokens in the same pair of square brackets. For example:

# correct way
[uid=5 gid=5] filename

# incorrect way
[uid=5] [gid=5] filename

There are two types of attributes:

boolean attributes
Those prefixed with a plus ("+") or minus ("-") sign.
value attributes
Those ending with an equals sign ("=") followed by a value. Don't put any spaces around the equals sign.

A question mark (?) before an attribute makes the setting conditional. The attribute is set only if it hasn't already been set. For example, ?+bigendian sets the +bigendian attribute only if +bigendian or -bigendian hasn't already been set.

The file_specification takes one of the following forms:

path
The path is the same on the host as in the image.
target_path=host_path
The specified file or contents of the specified directory are fetched from the host filesystem and placed into the image.
target_path={contents}
An inline definition. The contents of the file are listed within the buildfile itself, enclosed in braces ({ }) -- the file doesn't exist on the host system anywhere. The contents of the inline file can't be on the same line as the opening or closing brace.

Note: The mketfs utility doesn't parse the contents of an inline file for anything but the closing brace. For example, mketfs doesn't interpret a pound sign (#) in an inline file as the beginning of a comment. The syntax of the inline file depends on what it's used for on the target system.

Closing braces (}) and backslashes (\) in an inline file must be escaped with a backslash.


You can enclose a filename in double quotes ("") if it includes spaces or unusual characters.

Attributes

The mketfs command supports the following attributes:


Note: You should explicitly specify the cluster_size, block_size and num_blocks attributes as appropriate for your flash device to ensure that the image produced is fully compatible with your specific device.


Note: An OR-bar indicates that either the first element or the second element must be present, but not both (e.g. +|- bigendian means either +bigendian or -bigendian, but not +-bigendian).

bigendian attribute (boolean)

+|-bigendian

Set the byte order for the embedded filesystem to either big (via +bigendian) or little (via -bigendian) endian. The default is little endian.

block_size attribute

block_size=bsize

Set the block size for the ETFS. The block size depends on what memory device you have in your target hardware. The default block size is 16 KB.

cd attribute

cd=filename

Set the current working directory to the specified pathname before attempting to open the host file. Default is the directory from which mketfs was invoked.

cluster_size attribute

cluster_size=csize

Set the cluster size for the ETFS. The cluster size depends on what memory device you have in your target hardware. The default cluster size is 1 KB.

dperms attribute

dperms=dperms_spec

Set the access permissions of the directory. If specified as a number, the permissions are set to that number (just like the chmod command). If specified as an asterisk (*), the host directory's permissions are used; for an inline directory, the permissions are obtained from the umask of the user running mketfs. Otherwise, a symbolic mode string (which is a subset of chmod's) is used to delete, add, or set permissions.

The symbolic mode string consists of:

  1. a combination of u, g, o, and a
  2. one of -, =, or +
  3. a combination of r, w, x, s, g, and t.

You can include more than one symbolic mode string, separating them with a comma (,).

The default dperms_spec is *.

filter attribute

filter=filter_spec

Run the host file through the filter program specified, presenting the host file data as standard input to the program and using the standard output from the program as the data to be placed into the embedded filesystem. Default is no filter.

followlink attribute (boolean)

[+|-followlink]target_path=host_path

If you specify +followlink or omit it, mketfs follows any links and makes target_path a copy of host_path.

If you specify -followlink, mketfs creates a link called target_path that points to whatever host_path points at. It's up to you to make sure that the file pointed to is placed in the image.

gid attribute

gid=id_spec

Set the group ID number for the file. The value of this attribute may be either a number or an asterisk (*). If it's an asterisk, the group ID is taken from the host file; for an inline file, the group ID is the group of the user running mketfs. The default value for this attribute is *.

mount attribute

mount=filename

Specify the mountpoint for the ETFS. This option is ignored for mketfs. You can set the mountpoint with the -m option to the fs-etfs-ram command.

The default is "", which makes the ETFS drivers (fs-etfs-*) use the appropriate default, usually /fs/etfs.

num_blocks attribute

num_blocks=num

Set the number of blocks in the ETFS. If the number of blocks is specified, then the image file will be padded out to that size.

optional attribute (boolean)

+|-optional

If true, and the host file can't be found, output a warning and continue building the embedded filesystem. If false, and the host file can't be found, output an error message and exit mketfs. The default is false.

perms attribute

perms=perms_spec

Set the access permissions of the file. If specified as a number, the permissions are set to that number (just like the chmod command). If specified as an asterisk ("*"), the host file's permissions are used; for an inline file, permissions of 0666 are used. Otherwise, a symbolic mode string (which is a subset of chmod's) is used to delete, add, or set permissions.

The symbolic mode string consists of:

  1. a combination of u, g, o, and a
  2. one of -, =, or +
  3. a combination of r, w, x, s, g, and t.

You can include more than one symbolic mode string, separating them with a comma (,).

The default perms_spec is *.


Note: When running on a Windows host, mketfs can't get the execute (x), setuid ("set user ID"), or setgid ("set group ID") permissions from the file. Use the perms attribute to specify these permissions explicitly. You might also have to use the uid and gid attributes to set the ownership correctly. To determine whether or not a utility needs to have the setuid or setgid permission set, see its entry in the Utilities Reference.

prefix attribute

prefix=prefix_spec

Set the prefix on the target file names. The default is the empty string.

search attribute

search=path:path:...

This attribute specifies that mketfs should search for the file in the named locations on the host system. The search directory portion of the host file name isn't included in the name that's stored in the ETFS.


Note: Colon separators and forward slashes in the paths are the standard Unix conventions, but for Windows searches, you must use the standard Windows conventions, such as semicolon separators and backslashes in the paths.

type attribute

type=file_type

Sets the type of the files being created in the ETFS. Allowable types are:


Note: Specifying [type=dir] tells mketfs to make the named file a directory; you don't need to specify the type when you're copying the contents of a directory. For example, this command:
[type=dir]/usr/bin=/usr/nto/x86/bin

marks all the contents of /usr/bin as directories. To copy /usr/nto/x86/bin to /usr/bin, you just need to specify:

/usr/bin=/usr/nto/x86/bin

uid attribute

uid=id_spec

Set the user ID number for the file. The value of this attribute may be either a number or an asterisk (*). If it's an asterisk, the user ID is taken from the host file; for an inline file, the user ID is the user running mketfs. The default value for this attribute is *.

Examples:

Here's a sample buildfile, my_etfs.bld:

# A sample buildfile for mketfs

[cluster_size=1k block_size=64k num_blocks=240]
/home/jgarvey/nto_flash

In this example, we've specified a cluster_size of 1 KB, a block_size of 64 KB and a total device size of 240 blocks (which is the default configuration of fs-etfs-ram). The files and subdirectories from the /home/jgarvey/nto_flash directory on the host system are to be recursively copied into the root directory of the ETFS.

To create an ETFS image file using the above buildfile, invoke mketfs as follows:

mketfs my_etfs.bld my_image.etfs

This creates the my_image.etfs file containing the ETFS filesystem, which can then be copied to the target system as follows:

etfsctl -d /dev/etfs2 -S -e -w my_image.etfs -c

Exit status:

0
Successful completion.
1
An error occurred.

See also:

etfsctl, fs-etfs-ram

"Embedded transaction filesystem (ETFS)" in the Filesystems chapter of the System Architecture guide.